Cumdente Impression Materials

Precision begins with perfect flow

For precise impressions, good material alone is not sufficient. Critical are superhydrophilic properties, reliable wetting of moist surfaces without voids, and maximum dimensional stability – even under clinically demanding conditions.

Cumdente impression materials are based on state-of-the-art, functionally substituted Polyvinylsiloxanes – offering a combination of exceptional properties:

Sharp detail reproduction even in the presence of moisture and residual bleeding in the sulcus.
Easy removal without tearing or distortion
Multiple pours – ideal for complex restorations
Scanable – compatible with modern digital processing
Long-term stable – true to form without time limits

Suitable for inlays, veneers, crowns, bridges, implants, and situational impressions – precise, safe, reliable.

Even when digital intraoral scanners reach their limits – such as with residual bleeding, deep narrow cavities, long stumps, or functional impressions – Cumdente impression materials deliver reliable results without compromises.

The system is complemented by a unique, extremely flowable bite registration material, thixotropic key, which cures without dimensional change to become one of the hardest recording materials on the market. Invaluable in prosthetics and implant prosthetics when exact bite relationships, reproducibility, and perfect fit are crucial.

thixotropic putty

Super Hydrophilic. Kneadable precision tray/pre-moulding material based on A-silicone (Poly Vinyl Polysiloxane) with high tooth surface affinity. For maximum precision. Scanable. 2 tins (base and catalyser) of 400 g each, incl. 2 pcs. Dosing spoon (colour-coded).

Setting time

FAST

STANDARD

From €80.91*

Tip

T-Scan™ Novus™ (without computer)

Digital bite registration and analysis device. Indispensable for the diagnosis and treatment of functional disorders, temporomandibular joint disorders, CMD, headaches, cervical spine problems, masticatory muscle tension, etc. Network-compatible.- USB sensor handpiece - High-resolution sensor foils in small and large sizes (one box of 20 each) - Sensor holder (autoclavable): Suitable for sizes small and large (one box of 2 each)Computer not included.With the T-Scan, you can document occlusion and articulation with pinpoint accuracy (e.g. in the course of prosthetic and implantological restorations or implantology). orthodontic treatments).T-Scan analyses form the basis for precise grinding. Overloading of the implant can be specifically avoided. Recommendation:Carry out another T-Scan bite analysis a few weeks after the insertion of dentures or implant-supported dentures or after function or orthodontic treatment.

€12,990.00*

T-Scan™ Novus™ Core™ system (without computer) - single-user version, not network-compatible

Digital bite registration and analysis device. Functional diagnostics. CMD therapy. Occlusion. Articulation. Prosthetics. Implantology. ORTHODONTICS. Documentation.Not network-compatible- USB sensor handpiece - High-resolution sensor foils in the sizes small and large (one box of 20 each) - Sensor holder (autoclavable): Suitable for sizes small and large (one box of 2 each)

€8,600.00*

Upgrade from T-Scan™ Novus™ Core™ system to T-Scan Novus complete system (without computer)

Upgrade 1 piece

€4,999.00*

thixotropic key

Extra-hard, sprayable precision bite registration material for bite registration, registration production and bite fork technique. (Shore A hardness: 95). Highest dimensional accuracy, can be cut and milled, scannable. Very short oral dwell time.2 double cartridges (DS 50 / 1:1) of 50 ml each, incl. 10 pcs. T-Mixer grün.

From €50.31*

thixotropic engine

Superhydrophilised, single-phase impression material based on A-silicone (polyvinyl polysiloxane) with an affinity for tooth surfaces. Universally applicable, easy to demould. For maximum impression precision and dimensional accuracy. Scanable. Maxi-Mix cartridge (5 : 1), base and catalyst 550 g, incl. 10 dynamic mixers. Compatible with all common large cartridge dispensers.

Setting time

FAST

STANDARD

From €89.01*

thixotropic Ultra

Super Hydrophilic. Thin-flowing, superhydrophilised precision impression material based on A-silicone (Poly Vinyl Polysiloxane) with high tooth surface affinity. For perfect, sharp margins/surfaces even on/in the moist sulcus. Highly precise, tear-resistant. Scanable.2 double cartridges (DS 50/ 1:1) of 50 ml each for standard safety dispensing guns (1:1, 1:2), incl. 10 mixing tips, pink and 10 intra-oral tips

Setting time

FAST

STANDARD

From €50.31*

thixotrop Engine Fast Set 2 double cartridges

Superhydrophilised, single-phase impression material based on A-silicone (polyvinyl polysiloxane) with an affinity for tooth surfaces. Universally applicable, easy to demould. For maximum impression precision and dimensional accuracy. Scanable.2 double cartridges (DS 50 / 1:1) of 50 ml each, incl. 10 pcs. T-Mixer grün.

From €50.31*

thixotropic SITU super fast set / situation impression

Addition-curing situ impression material with high affinity to the tooth surface, alginate-like consistency and processing. Precise definition, high tear resistance, easy demoulding even with undercuts, stable in storage and dimensions, scannable and can be poured several times (immediately). For all types of situational and opposing jaw impressions, in orthodontics, for the fabrication of splints, temporaries, etc. 1 x Maxi-Mix cartridge (5 : 1), base and catalyser of 560 g incl. 10 dynamic mixers. Compatible with all common large cartridge dispensers.

From €50.31*

Dynamic mixer

For thixotrop Engine and thixotrop SITU (Maxi-Mix cartridge 5:1/50 ml). Compatible with all common mixing / dosing devices.Pack of 40 pcs.

€52.90*

thixotropic margin

Super Hydrophilic. Tray margin material for functional impressions and block-out material for individualised or customised impressions based on A-silicone (Poly Vinyl Polysiloxane). For a perfect functional margin design. Scanable. 2 double cartridges (DS 50 / 1:1), 50 ml each, incl. 10 pcs. T-mixer grün.

Setting time

FAST

STANDARD

From €50.31*

thixotropic clear

Transparent, fast-setting moulding, registration and pre-curing material.Working width (23 °C) incl. mixing time in min.: 0:30Setting time (35 °C) incl. mixing time in min.: 1:301 double cartridge (DS 50 / 1:1) of 50 ml, incl. 10 pcs. T-Mixer grün.

From €26.91*

T-Scan sensor holder small

Replacement sensor holder, (box of 2 pcs.) autoclavable (134 °C).

€49.00*

T-Scan sensor holder contactless

Replacement sensor holder, (box of 2) autoclavable (134 °C), contactless.

€49.00*

thixotropic bond

Universal tray adhesive for addition-curing dental impression materials. For uncompromising adhesion.1 bottle each of prep (primer) and link (tray adhesive) , 5 ml each .

From €25.11*

SoftBase Line

Permanently soft-retaining high-performance relining material (direct and indirect) based on A-silicone. Colour: Gingiva pink.1x double cartridge 50 ml

From €67.41*

SoftBase Primer Refill

For permanently soft high-performance relining material (direct and indirect) based on A-silicone. Colour: Gingiva pink.1x bottle 5 ml

€51.90*

High-resolution sensor foils

Size

large

small

€289.00*

Product variants for every requirement

Thixotrop Ultra Fast Set: A thin-flowing, highly hydrophilic precision impression material based on A-silicone. Ideal for perfect, sharp edges and surfaces, even in moist sulcus.
Thixotrop Engine Fast Set: A superhydrophilic single-phase impression material, versatile and easy to remove from the impression. Offers maximum precision and dimensional stability.
Thixotrop SITU Super Fast Set: A tooth surface-compatible situational impression material with alginate-like consistency and handling. Precise detail reproduction, high tear strength, and scan-ready.